What problems should be paid attention to when using the drum powder feeding machine daily? The drum powder feeding machine feeds and conveys→drum powder feeding→vibrating discharge→screw powder returning→powder sieving→automatic powder filling sequence arranged and fixed in sequence. Through the following article, we have a detailed understanding of the relevant knowledge of the roller powder feeding machine.
After the equipment is in normal operation, start production. Pour the powder into the powder box or feeding mesh belt at a uniform speed. The amount of powder should be added according to the actual production situation. Do not add too much at one time to cause congestion.
After the coating powder is evenly circulated, it can be fed into the production. Raw materials need to be fed into the storage tank above the feeding mesh belt by machine or manually, and the size of the feeding material is controlled by adjusting the degree of the outlet baffle. (Adjusted according to the actual production situation)
The speed of the drum, discharge mesh belt, and powder filling screw can be adjusted by frequency converter, which can be adjusted reasonably according to production needs.
There is a small vibration plate under the drum outlet, pay attention to whether there is material accumulation during use.
The outlet mesh belt is equipped with a vibrating block, which removes excess powder coating on the product through vibration. The vibration amplitude is positively related to the running speed of the mesh belt, and can be adjusted according to the actual situation.
It is strictly forbidden to insert hands into the auger during the production process of the powder returning auger.
If you hear abnormal noise of the equipment during the production process, please press the emergency stop button immediately and cut off the power for inspection to avoid unnecessary damage. It is strictly forbidden to remove protective measures such as motor guards and chain guards during the operation of the equipment.
If there is powder leakage on both sides of the vertical screw, it can be adjusted by tightening the bolts. Please clean the equipment in time after use.
Through the above article, we have learned about the roller powder coating machine, and hope it will be helpful to everyone. You can continue to pay attention to some knowledge about the drum powder coating machine.
Post time: Mar-13-2023