Auto Small Type Battering coating Machine For Tempura Foods

Short Description:

NJJ-200 battering coating dips the product into the slurry, so that the product is coated with a layer of tempura batter. It is suitable for tempura products, poultry, seafood, vegetables and other products.

Send email to us

Product Detail

Product Tags

Features of chicken breast slicing machine

1.It coats the product with a layer of tempura batter by immersing the product in the slurry.
2.The product is attached by the upper and lower mesh belts, immersed in the slurry and fully coated;
3.The distance between the upper and lower mesh belts can be adjusted;
4.Even with high-viscosity slurry, smooth coating can be guaranteed;
5.By adjusting the fan to control the coating amount of the product;
6.NJJ-200 tempura battering machines are all made of stainless steel, corrosion-resistant, easy to disassemble and clean without tools.

Applicable materials

Meat (chicken, mutton, beef, pork, etc.), aquatic products (fish, shrimp, squid, etc.), vegetables and beans (potatoes, sweet potatoes, pumpkins, carrots, green beans, soybeans, broad beans, etc.), mixed (mixed meat and vegetables, Aquatic meat mix, seafood, vegetable mix).

Detail drawing

NJJ-200 battering machine

NJJ-200 tempura battering

Tempura products

Precautions for equipment use

1. The equipment should be placed on a level ground. For equipment with wheels, the brakes of the casters need to be opened to prevent the equipment from sliding.
2. Connect the power supply according to the rated voltage of the equipment.
3. When the equipment is in operation, do not reach into the inside of the equipment.
4. After the equipment is finished working, the power must be cut off before the machine can be disassembled and cleaned.
5. The circuit part cannot be washed. When disassembling and washing, be sure to pay attention to the parts scratching the arm.

Maintenance matters

1. Every time you clean the equipment and parts in contact with food, wipe off the water with a dry cloth before the group leader can get on the machine.
2. Add lubricating oil to the bearings, chains, gears and other transmission parts on the equipment every quarter.
3.The electric control box should be checked regularly to ensure that the line is safe and works normally.